game | tudwaythecore.com

February 2012
M	T	W	T	F	S	S
« May
	1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29

Mar 28

creating a platform game in as3 part 3

flash, game, platform, tutorial 3 Comments »

You should read this and this before continuing, if you haven’t already.

This little platform engine works fine at the moment, but most platform games have more than one platform. i will add another platform and see how that goes.

if you move right on the screen you will see that we have a problem. the character is floating on the screen!! This is because we are using hitTestObject and not hitTestPoint. Lets change that.

So we can make some more complex terrain, i have made a new movieClip linkaged as ground, and another one linkaged as character. These replace the land and char movieclips that we drew in actionscript earlier.

code:-

import flash.display.*;
import flash.events.*;
stage.frameRate = 30;
stage.addEventListener(Event.ENTER_FRAME, run);
stage.addEventListener(KeyboardEvent.KEY_DOWN, keyPressed);
stage.addEventListener(KeyboardEvent.KEY_UP, keyReleased);

var land:MovieClip = new ground();
land.x=200;
land.y=300;
stage.addChild(land);

function run(event:Event) {
velocity+=gravity;
if (land.hitTestPoint(char.x, char.y+char.height/2, true)) {
velocity = 0;
char.y–;
if (attemptJump==true) {
velocity =-5;
}

} else {
char.y += velocity;
}
if (goleft==true) {
char.x+=lspeed;
}
if (goright==true) {
char.x+=rspeed;
}
}

The most important thing that i have changed is the hitTest function – if (land.hitTestPoint(char.x, char.y+char.height/2, true)) This is a much better way of doing it than hitTestObject because you can have angled platforms. Lets explain the if statement. if the “char” movieClip’s foot hits the land than do the function that follows. Lets focus on the char.y+char.height/2 this declares the “foot” of the moviclip as the registration point of “char” is in its centre. so centre + half the height gives the bottom.

The next thing that you will notice i have changed is to put a char.y– in the hitTest function. this just keeps the “char” movieclip on the top of the floor, so it doesn’t sink through it.

The only other thing that i have changed is to add an “else” statement to the if statement that checks the hitTest between the “char” movieclip and the “ground” movieclip, and move the line of code that makes the “char” fall (char.y += velocity;) into it. This just means that it only makes the “char” fall if its not touching the ground movieclip.

Demo

As you can see from the demo, you can successfully walk up and down slopes without problem. But the character seems to vibrate, which is kind of weird in a platform game! This is easily rectified and i will show you how in the next tutorial. The character also seems to be able to walk through steep hills.

Mar 27

creating a platform game in as3 part 2

flash, game, platform, tutorial No Comments »

Read creating a platform game in as3 if you haven’t already.

In this tutorial i will show you how to make your character move and jump.

So… we need to make a function for key up events and for key down events to monitor key input so that we can have player controlled characters.

lets put this into code

var gravity:Number = 0.2;
var velocity:Number = 0;
var lspeed:int = -2;
var rspeed:int = 2;
var goleft:Boolean = false;
var goright:Boolean=false;
var attemptJump:Boolean=false;
var char:MovieClip = new MovieClip();
char.graphics.lineStyle(2, 0×112233);
char.graphics.beginFill(0×112233);
char.graphics.drawRect(200, 0, 20, 50);
char.graphics.endFill();
addChild(char);

var land:MovieClip = new MovieClip();
land.graphics.lineStyle(2, 0×112233);
land.graphics.beginFill(0×112233);
land.graphics.drawRect(0, 350, 400, 25);
land.graphics.endFill();
addChild(land);

Click inside the demo to focus than use the arrow keys to move and jump. You will notice a problem where you can float, we will fix this later, but for now the new code…explained!

Lines 5-6: New event listeners for the key up and key down events.

lines 9-10: These are new speed variables, left speed and right speed.

lines 11-13: These are boolean statements, true or false statements. They are declared now rather than when i use them.

Key Pressed Function: This function is called whenever a key is pressed. When the UP key is pressed the attemptjump boolean = true. When the LEFT and RIGHT keys are pressed the booleans goleft and goleft are called true respectively.

Key Released Function: This function is called whenever a key is released. In the event of the UP key being released attemptjump is called false, the other booleans are also called false.

Run function: I have made some changes to the run function, where i make use of the attemptJump, goleft and goright booleans. Another if statement for each boolean. eg if (attemptJump==true) . This is called whenever the attemptJump boolean is true, so when the UP key is pressed and it makes the velocity = -5. I use 2 more if statements for the other booleans, where i increase the “char”‘s x position by lspeed, if goleft = true, or rspeed, if goright = true.

Now to sort out that unlimited jumping issue.

I think we can sort this by only allowing the player to jump if its touching the floor.

some code, just the new run function.

All i have changed is put the if (attemptJump==true) statement inside the hittestobject statement. This means that it only checks to see if the player is attempting to jump if the “char” movieClip is touching the “land” movieClip.

A demo is in order!

Thats it for the 2nd part of my platform tutorials. Please wait for the next in the series.

Mar 27

Creating a platform game in as3

flash, game, platform, tutorial 2 Comments »

I’ve always wanted to create a platform game, so here goes.

In a platform game we have a moving character, several platforms, and some type of vector, such as gravity or wind.

I’m going to create all of the movieclips in actionscript for now, so you won’t need to set anything up.

import flash.display.*;
import flash.events.*;
stage.frameRate = 30;
stage.addEventListener(Event.ENTER_FRAME, run);

var gravity:Number = 0.2;
var velocity:Number = 0;
var char:MovieClip = new MovieClip();
char.graphics.lineStyle(2, 0×112233);
char.graphics.beginFill(0×112233);
char.graphics.drawRect(275, 0, 20, 50);
char.graphics.endFill();
addChild(char);

var land:MovieClip = new MovieClip();
land.graphics.lineStyle(2, 0×112233);
land.graphics.beginFill(0×112233);
land.graphics.drawRect(0, 350, 550, 25);
land.graphics.endFill();
addChild(land);

function run(event:Event) {
if (char.hitTestObject(land)) {
velocity = 0;
}
char.y+=velocity;
velocity+=gravity;
}

Ok you may need to refresh the page to view the swf.

as you can see, the character block falls down with increasing velocity and as it hits the floor it stops.

Lets explain the code so far:-

Lines 1-2: Importing the packages that i will use in my actionscript file

line 3: Setting the framerate to 30, this is how many frames per second go past.

line 4: This is an eventlistener that runs the function run on every frame, so 30 times a second.

lines 5-6: Setting up the variables, gravity will be a constant but velocity will change.

line 7: Setting up a new movieClip called char

line 8: The lineStyle of the char movieClip, 2 pixels thick and a dark blue colour.

line 9: The fill colour of char, same as the line colour

line 10: Creating a shape for the char movieclip, this is a rectangle. drawRect(x, y, width, height)

line 11:Telling flash to end the fill that we started on line 9

line 12: Adding the char movieclip to the stage.

lines 13-19: Setting up the land movieclip, the same way as we created the char movieclip.

line 20: Declaring the function “run” with an event type of event.

lines 21-23: An if statement that says if the char movieClip collides with the land MovieClip than set the velocity to 0.

line 24: Setting up the gravity vector, so that the “char” movieClip’s y axis is affected by velocity.

line 25: Increasing the velocity variable by gravity once per frame. This will make the char fall to the land with increasing speed.

Thats all for this first post on creating a platform game in as3.

The next section will be out shortly.

Recent Posts

Recent Comments

Categories

Archives

games

creating a platform game in as3 part 3

creating a platform game in as3 part 2

Creating a platform game in as3